HVL-F60 RM2 External Flash with wireless radio control

High power stable GN60 output for professional needs

Since HVL-F60RM2 is designed and produced by Sony, it is able to communicate with α machine bodies to provide a uniform Light GN60 emission to each flash. HVL-F60RM2 supports 20 mm focal lengths (14 mm with diffuser) to 200 mm.

Flash control connected to the VIST detection

With compatible cameras3, the white balance is automatically adjusted so that the subject's face has natural colors. HVL-F60RM2 collaborates with VIST detection to provide an ideal lighting for the main subject.

Maximum accuracy of automatic white balance

Thanks to the internal design, this advanced flash unit transfers the color temperature data to the camera, where they are used to accurately adjust the white balance and obtain natural colors in any situation.

Improved issue for focal length and size

The lighting angle is automatically adjusted so as to correspond to the focal length of the lens used in a range of 20-200 mm. The light distribution is regulated for optimal results with full-frame or APS-C format.

High-speed continuous flash with quick charging

The advanced electronics and structure offer quick charging times and allow continuous shots with flash even for prolonged periods. The four battery set ensures over 240 flash with charging time of 1.7 seconds4. The optional FA-EBA1 external flash battery adapter can be used for charging times up to 0.6 seconds4.

Prevention from overheating for prolonged sessions

The use of heat-resistant materials and an optimized flash algorithm guarantees greater overheating resistance, allowing prolonged shutter sessions.

Smart communication increases speed

Stable shots with high-speed continuous flash

With a compatible camera3, HVL-F60RM2 it continuously provides flash up to 200 high-speed frames5 up to 10 fps. Thus missing frames due to flash synchronization errors.

Up to 20 flash per second

With the electronic shutter on a compatible camera3, it is possible to produce up to about 20 flashes per second for more than 1 second6. The FA-EBA1 external flash battery allows about 20 flash per second for more than 10 seconds.

Synchronization up to 1/400 sec. with compatible camera

With a compatible camera3, HVL-F60RM2 allows Flash synchronization up to 1/400 sec. You can thus mitigate the background using the flash to illuminate the main subject, illuminate moving subjects on a bright background and much more.

P-TTL flash control for light variations

If used with a compatible camera, the sequencing of high-speed controls in the camera uses the pre-flash during continuous shots, even for rapid movement subjects and with drastic light variations.

Minimum flash activation delay

When using HVL-F60RM2 together with a compatible camera3, the time interval between the power of the shutter button and the flash emission is significantly reduced8, so as to capture the most fleeting moments.

Intelligent communication improves operations

Adjustment with Quick Shift Bounce system

Tilt the left or right-handed 90-degree flash head quickly, 150 degrees upwards or 8 degrees downwards and passes from the horizontal orientation to the vertical one. The updated mechanism is more compact and convenient.

Complete control from compatible cameras

You can check Flash compensation, report and other parameters through compatible cameras2. You can use the custom button on the camera to call up the flash parameters and adjust them while using the viewfinder.

Rapid and intuitive light level controls

The Level + e - dedicated buttons allow direct and quick control of the power and light compensation and can also be used to control the same parameters on other Flash drives associated in wireless mode, facilitating the workflow.

Efficient TTL light level memory

The TTL flash level can be stored and then called for manual adjustment. This greatly reduces the time required to manually set the flash parameters into various shutter-release situations.

Reliability and higher features

Sled metal foot with solid side frame

A metal foot with robust side frame greatly increases the resistance and duration of the multi-interface support and its electrical contacts.

Excellent resistance to dust and moisture

Dust-resistant and humidity design9 helps ensure high reliability in outdoor environments. The gasket guarantees greater resistance to dust and moisture with some Serie A bodies.

Versatile wireless radio communication

Stable wireless radio communication is guaranteed at distances up to 30 m8. Reliable and error communication is also obtained near reflectors and obstacles. Slow synchronization, synchronization on the second curtain and multi-flash2 are supported.

Wireless radio control for up to 15 flash drives

Check up to 15 flash drives and / or receivers in 5 groups10. HVL-F60RM2 is able to communicate with flash drives that are not equipped with wireless radio communication via the optional FA-WRC1M command and / or the FA-WRR1 receiver.
[1] Command function [2] Receiver function

Other features for optimal expressiveness

Automatic white balancing with color filters

When one of the supplied color filters is connected to the flash drive, the white balance of the camera is automatically adjusted for a natural mix between flash and ambient light.

Flash control with reflected flash adapter

When using the supplied Flash adapter, the flash drive communicates with the camera to obtain optimal flash distribution for soft and uniform lighting. The diffuser optimizes this effect.

Synchronization terminal in / out wired

The single terminal provides input and output synchronization connections. In can be used to receive activation signals from an exposure, while Out to activate additional flash drives.